Products - Primers - Shilpi Redoxide ZINC Chromate Primer

SHILPI REDOXIDE ZINC Chromate primer is highly anticorrorsive primer available in the range of primers. This primer will give good adhesion to the substrate and best anticorrosiveproperties to the metal surface becuase of ZInc Chroma added in the primer which form a chromic layer on the surface of dried film which is very strong and prevent corrosion to start on the metal surface. it can be easily applied by brush or spray on the metal surface to form a hard and tough adherent coating.

Technical Data :

   
» Area of application » Ferrous Substrate
» Viscosity » 120 ± 10sec by ford cup No.B-4 at 30º C
» Specific gravity » 1.30 ± 0.05kg/ltr
» Finish » Smooth and Matt
» Fineness of grinding » 5+ on hegmen gauge
» Colour » close match for Redoxide
» Drying Time » SD= not more than 1hr
HD= not more than 16hrs
» Method of Application » By Brush Or Spray
» Flash Point » Not below 30º C
» Covering Capacity » 12 to 15 sq mtr/ltr/coat at 30 micron DFT
» Pack available » 20ltrs, 10ltrs, 4ltrs, 1ltr,500ml,200ml

Direction For Use/ - Ensure that the surface to painted is free from moisture loose matter,grease,oil etc. Degreasing and Derusting can be done by suitable treatment. Shilpi Red oxide Zinc Chromate Primer can be applied by brushing or spraying. To adjust Viscosity use recommended thinner for best result. Allow the primer coat to dry for six hours and then sand with emery paper no.180 before application of subsequent coat.Use of knifing paste filler is recommended to fill up dents, and surface imperfection.